Brief Introduction of 2LTC6109/8T jig machine
2LTC6109/8T jig machine is one big mdoel jig machine with 25-40TPH processing capacity and below 10mm feeding size. It is side-driving transmission part and trapezoid jigging section. The width of jigging area become wider from feeding port to discharge port, so as to get good recovery rate.
Introduction of 2LTC6109/8T jig machine
The jig machine 2LTC-6109/8T is also known as a trapezoid jig machine(lateral-drive diaphragm jig separator) wich is a large jigging gravity separator with four adjustable jigging beneficiation slots. It has a trapezoidal jig surface with high recovery rate and high handling capacity. This jig separator is widely used for the ore dressing of metallic and non-metallic mineral such as hematite, limonite, gold placer, manganese ore, tungsten ore, tin, tantalum and niobium ore, mercury, fluorite ore, barite ore, celestite ore, etc. The jig separator also be used to process metal smelting slag and extract the alloy particles and recyclable substances. So, it is a smelting slag recycling machine for users.
The structure of 2LTC6109/8T jig machine
The trapezoidal jigger is composed of eight jigging chambers, two columns, four rooms for each column. It gradually become wide from the mineral feeder to the discharge end, and the jig separator has big handling capacity, good adaptability. This product is suitable for being used in the concentration of medium and fine minerals. And the effective recovery limit is 53 microns. The jig separator is widely used in the re-election of iron, manganese and tin in China. The water supply pipe is between two columns and supply water to the chambers.
The trapezoidal jig separator has big handling capacity, high recovery rate and wide workable particle size range. It is an ideal gold separator and tin processing machine for gold placer extraction and tin ore dressing.
Working principle of 2LTC6109/8T jig machine
Motor drives reduction gears moving by the transmission. There are eccentric adjusting devices at both output ends of the reduction gears.The eccentric adjusting device drive the connecting rod after adjusting to drive the driving pan to do the alternation motion extruding the liquid in the cell body and promoting waves. The waving water moves through the screen to impact the ore on the screen making the ore in the state of free-failing body in the liquid. The ore grains own different dropping speed in the liquid because of the different density, so the ore will separate naturally. Finally, the heavier ore will be discharged out of the cell body after the adjustment and the lighter ore floats the waste-discharging mouth to be discharged and the whole ore beneficiation process is finished.
Advantage of 2LTC6109/8T jig machine
- Energy-saving, high enrichment efficiency and environmental-friendly.
- Trapezoid Working area, high recovery rate, and large handling capacity.
- Eight jig dressing chambers, adjustable stroke and stroke frequency for each slot, wide range of selected particle size.
- High stability, simple operation, convenient maintenance
Application of 2LTC6109/8T jig machine
Techinical Parameter of 2LTC6109/8T jig machine
| Model |
Feeding size(mm) |
jigging area(㎡) |
section form |
stroke(mm) |
stroke time(r/min) |
production capacity(TPH) |
power(KW) |
| 2LTC6109/8T | <10 | 5.76 | trapezoid | 0-50 | 0-300 | 25-40 | 8.8 |