LTA55/2 jig machine is the smallest model of lta series jig machine ,which belong to double rooms under single plug-fuse type. They exploits water as medium, and separate the concentrate from teh gangue or the waste according to the density differences of different materials.

Introduction of LTA55/2 jig machine

Jig Machine is a compact and efficient gravity device which is utilized throughout the world for recovery of a wide range of minerals.It can separated the liberated(free) heavy mineral from light mineral by the means of specific gravity.

LTA55/2 jig machine is the smallest model of lta series jig machine ,which is kind of sine-wave down-moving jig machine with one row and two or three chambers. It features simple structure and little maintenance work. It is wildely used in small scale gravity separation line.

Working Principle of LTA55/2 jig machine

LTA series jiggers are the down-moving tri-rooms jigger. It transmits by the pulley of the eccentric shaft driven by the motor.The eccentric shaft bear form decentraction motion after the adjustment of the adjustment device and the connection rod will be driven to do the  alternating movement. The other end of the connecting rod is fixed on the moving shaft of the moving frame. There is a supporting point connecting to the rack section in the center of the moving frame, so the moving frame will be driven to do the up-down alternating motion focusing on the supporting point. The down-centrum fixed on the moving frame move up-down alternatively passively to press the water flow in the case to product waves and the waving water flow through the screen will dash the bed medium and the ore to do parabola motion. The ore will be fed at the feeding port, and the ore will drop in different speed to separate naturally. The ore with small density will be discharged out of the machine as a result of the water flow while the ore with big density will go through the bed medium to enter the down-centrum and will be discharged from the concentrate discharging port to finish the jigging beneficiation.

Advantage of LTA55/2 jig machine

1, The structure is compact,  a small area covered, large handling capacity.

2, Eccentric connecting & rod transmission, sine wave jig cycle curve & powerful jig water flow

3, Simple structure & simple operation, convenient maintenance, safe and reliable operation.

4, Convenient adjustment of Stroke and stroke frequency, and low operation cost.

Techinical Parameter of LTA55/2 Jig machine